0.500 - 9.999MHz in 1kHz steps 10.00 - 99.99MHz in 10kHz steps 100.0 - 150.0MHz in 100kHz steps
Impedance measurement range
Measures impedance at any angle
Maximum accuracy from 3W to 1kW
Operational from 1W to 10kW
Measurement speed
Display updated every 500 milliseconds approx
Typical accuracy of measurement
The accuracy depends on the impedance being meaured. Guaranteed accuracy for 3 standard impedances are listed below:-
impedance=50W
magnitude±
1%, angle ±
1°
impedance=10W magnitude±
3%, angle ±
3°
impedance=1kW magnitude±
2%, angle ±
3°
Measurement modes
Complex impedance in polar or rectangular form
R-L-C in series or parallel equivalent circuit format
SWR for any system characteristic impedance
Complex reflection coefficient for any system characteristic impedance.
Return loss in dB for any system characteristic impedance
Swept measurements and data logging to a PC via the RS232 serial port
SWR measurement range
Greater than 100:1 (depends on system characteristic impedance)
Power source
DC plug-pack or internal battery (auto power-save in battery mode)
Display
80 character alphanumeric LCD
Measurement probe
Active probe on ~1.5 metre cable.
Allows direct in-circuit measurements.
Interface
RS232 on 9-pin D Software
runs under WindowsXP
Weight
1.9kg
Dimensions
250w x 200d x 80h
Accessories
User Guide (supplied)
Windows interface software permits swept frequency measurements and data logging (supplied)
Coaxial adaptor (adapts the probe to plug directly onto an N-type 50 ohm connector)(supplied)
